/SPR-HOME-7-best-grout-sealers-4156381-primary-1ac18b87c1a64afca99f235fd7f1d6fd.jpg)
511 spray on grout sealer directions. Sealer will be dry to the touch in 1 3 hours. Apply enough to wet the surface. On larger jobs grout can be sealed by retreating the entire area including the tile or stone surface a second time. Allow 511 Impregnator to stand for approximately 3 – 5 minutes for maximum penetration.
Alter the natural look while making the grout easier to clean. Transparent and will not yellow under any circumstances. Allow 511 Impregnator to stand for approximately 3 – 5 minutes for maximum penetration. Apply a second coat of grout sealer following the same general guidelines. See coverage charts Be careful not to saturate the open grout joints. Apply enough to wet the surface. Now wipe the tile with a.
If the sealer leaves any hazy or white splotches on the tile dampen a clean cloth with a bit of the grout sealer and wipe the area until the blotch is gone. 511 Spray-On Grout Sealeris UV.
See coverage charts Be careful not to saturate the open grout joints.
Apply a second coat of grout sealer following the same general guidelines.
Heavy excess overspray should be wiped of tiled surface with a clean towel before it dries.
Insure that the surface is clean dry and free from contaminants.
Apply 511 Impregnator to all grout with a paint brush. Let it seal for at least 12 hours prior to grouting. This unique spray-on sealer provides an invisible barrier that is res. Grout Sealing Once the grout has cured per the manufacturers recommendations proceed with the sealing of the grout. 511 Spray-On Grout Sealer can be used on interior and exte-rior applications.
Transparent and will not yellow under any circumstances.
Miracle Sealants 511 Spray-On Grout Sealer is a new fast easy way to seal tile grout.
To apply 511 Spray-on Grout Sealer hold nozzle 6 inches from surface and spray along grout lines.
Allow 511 Impregnator to stand for approximately 3 – 5 minutes for maximum penetration.
511 Spray-On Grout Sealer is UV.
Grout Sealing Once the grout has cured per the manufacturers recommendations proceed with the sealing of the grout.