Tile crown molding shower. First I cut a small scrap piece of both baseboard and the crown molding I planned to use just. If the crown will run before and past the shower I would run the crown then butt the tile to. Attaching crown molding over shower tiles We have 4 12 inch crown molding in the bathroom and did not continue it around the shower thinking that the tile needed to be installed first. If she is adamant about crown thru the shower area and if you have some tile left measure to where your crown will sit and remove the tile above that line including the full tile that sits at that line.
If the crown will run before and past the shower I would run the crown then butt the tile to. Thats the way to do itshim the crown molding out 14 so as not to lose the appearance of the crown molding profile. First I cut a small scrap piece of both baseboard and the crown molding I planned to use just. A La Maison Ceilings.
Bathroom Crown Moulding Installation. Polyurethane foam crown molding is a suitable substitute for wood crown molding in the shower. You could also add a wood strip behind the crown that is the same thickness as the tile—. It really depends on the type of shower and how much moisture will accumulate up there.
I think adding the crown molding is timeless whereas I feel tile in the ceiling can date a place fyi the tile I have is very nice white marble just a bit much all over the place. The tile should be able to go slightly under the crown molding but the wood is still there to be nailed into. Using a piece of crown molding as a reference nail the board to the wall slightly above the bottom edge of the crown molding. However you have stated a situation that you will have to address before you start. After all the tile only needs to stick under the crown 34 or so.